BORGO
SEATING MECHANISMS


MT1 descriptions going left to right:
Back height adjustment
Back angle adjustment
Pneumatic height adjustment
Seat angle / Tilt lock adjustment
Tension knob
Forward tilt



All Mechanisms Swivel 360 degrees

Tension Knob
Turn clockwise to increase tension, turn counter-clockwise to decrease tension

Manual Height Adjustment
Hold onto bell and turn chair clockwise to lower, counter-clockwise to raise

Back Depth Adjustment
Loosen hand wheel (do not remove) and slide chair back to desired position, then re-tighten hand wheel

Back Angle Adjustment
While seated, pull paddle up, when desired angle is achieved push paddle down to lock

Tilt Lock
To lock chair in position, push paddle down. To allow free tilt movement, pull paddle up

Pneumatic Height Adjustment
To lower, pull lever up while seated. To, pull paddle up with your weight off the seat

Forward Tilt
Lean back in chair, bring tilt lock paddle to the up position and rotate lever clockwise to allow the seat to angle forward.
To lock in position depress tilt lock paddle into the locked position

Back Height Adjustment
Turn counter-clockwise to loosen, move chair back to desired height and re-tighten

Seat Angle/Tilt Lock Adjustment
To change seat angle, pull paddle up while seated, push paddle down to lock when desired angle is achieved

Ratchet Back Height Adjustment
Simply lift back to desired position, the back locks into place. Lift back all the way to the top, it will reset itself

Infinite Seat Angle Adjustment
Push paddle down to lock chair in position, to allow continuous movement , pull paddle down